B-10 Advantages

  • Higher Brinell hardness. Higher yield and shear strength.
  • Tension leveled and degreased for contamination free holes, closer tolerances and improved registration.
  • A superior heat sink for the drill bit.
  • The inherent high melting temperature of approximately 650°C provides for clean drill bits and quick ejection of chips.
  • Permits lower surface feet per minute drilling and an increase feed rate.
  • Eliminates hole wall smearing thereby increasing the life of the drill bit.
  • Eliminates burrs by reducing the back pressure on the drill bit upon entry.
  • Varying thickness from 0.18 mm (0.007") to 0.38 mm (0.015") for specific chip load applications.
  • Recyclable.